Roller Pro Rider E-Bike, Руководство пользователя

Страница: 8 / 24

2.Fold the handle as shown in the below diagram.
CHARGING THE BATTERY
How to charge:
1.Ensure the E-bike is turned off before charging and remains off while charging.
2.The charging connector is located at the bottom of the E-bike as shown on the below diagram.
3.Connect the plug to a wall outlet to start the charging process.
4.The charging LED light will turn on red during charging. Once the battery is fully charged, the
LED light will automatically turn to green.
5.Disconnect the plug and replace the cable inside the charger compartment.
6.Make sure the charger compartment is well closed and secured after charging.
Battery precautions:
Before charging, make sure your E-bike Rider is turned off.
If charging for the first time, make sure the first charge is at least 3 hours.
Do not under any circumstances, use the E-Bike while it is connected to the charger.
Do not charge longer than necessary. Standard charging time is approx. 3 hours. Charging for a
longer period may affect the battery life and/or performance.
To maximize the battery life, charge it once every month or once a week after riding. This
process is very important for the battery to keep running.
Charge preferably in places away from flammable products.
Monitor and control the charging process. (Do not exceed the recommended charging time).
Do not charge your E-Bike at night, while you are sleeping.
If your E-Bike has been exposed to high or low temperatures, wait until it attains normal
temperature before charging.
7