EN-29
Self-Timer
The self-timer can be used in situations such as group shots. When using this option,
you should either mount the camera on a tripod (recommended) or rest it on a flat,
level surface.
1. Secure the camera to a tripod or place it on
a stable surface.
2. Rotate
the
mode
dial
to , , , ,
, or
.
3. Press the power switch to turn on the
power.
4. Press the four-way controller (
S
/
) and
use (
S
) to select your desired self-timer
mode. You can also change the setting
using four-way controller (
WX
).
5. Press the
button to confirm the setting.
6. Compose your scene and press the shutter
release button.
The self-timer function is activated.
The photograph is then taken after the preset time.
To cancel the self-timer at any time, press the four-way controller (
S
/
) or
press the shutter release button halfway.The table below will help you choose
the appropriate self-timer mode:
After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
Self-timer mode
Description
2 sec.
Self-timer
The image is captured about 2 seconds after the shutter is
pressed. This mode is useful for preventing camera shake.
10 sec.
Self-timer
The image is captured about 10 seconds after the shutter is
pressed. This mode is suitable for the shots in which the
photographer has to be included.
10+2 sec.
Self-timer
The first image is captured about 10 seconds after the shutter
release button is pressed, and then the second image is
captured 2 seconds later. This mode is convenient when
capturing group images in succession.
Flash does not fire in this
mode.
Captu
pture Mod
e Mode
2 sec. Self-timer
2 sec. Self-timer
Capture Mode
2 sec. Self-timer
OK :
OK :
OK :
