12
Technical Data
Battery capacity:
7.4V/1200 mAh
Charging voltage:
DC 12V
Working temperature:
-10~45 degree
Standby time:
over 50 hours
Max load capacity:
1.5 kg (Horizontal)
1.0 kg (30 degree slope)
0.8 kg (Vertical)
1.5 kg (Hang upside down)
Battery charge time:
4 hours
Motor:
step motor
Battery run time:
6 hours when the load capacity is about 1 kg
Note:
If the setting 360° at 15/60 minutes is chosen, it will be possible
to do video time lapse recordings. In all other modes only photo time
lapse recordings can be done.
If all 4 R.T LEDs are flashing at the same time this indicates that the
battery power is low and the power will be off soon. Then please
recharge the battery with a 12 V DC adapter.
Do not force to rotate the rotating table by hand to avoid damages on
the built-in motor. To get the rotating table to 0 degrees, please select
360 degrees in 5 minutes and start the device. If the Rollei ePano is at
0 degree please stop the device again.