Rollei CARDVR-308, Руководство пользователя

Страница: 25 / 42

24
engineer is started again, it will be back to normal loop
recording.
•
Motion Detection:
-
If disconnected external power supply when the device is
powered on, the system alert message “
Press OK to
power off or enter Parking mode after 10 sec
”. This
means the system will enter Motion Detection
automatically in 10 seconds, and then LCD screen turns
off (the device will turn off the screen temporarily, but still
in standby detection status. Press any button to turn on
the operation screen and resume to normal loop
recording).
-
In the Motion Detection mode, when the device detects
any motion in front of lens, the automatic record will be
activated.
- In this mode, when the device detects any motion in front
of lens, the video recording will be triggered and the event
will be recorded for 10 seconds (per file). If the event lasts
more than 10 seconds, the device will keep recording up
to 2 minutes.
- In this mode, the device is in standby mode until event
happens. This mode will consume more battery power.
- To disable this function, in the standby mode or motion
detection recording, press any key to wake up the screen,
and resume to normal loop recording; or when the car
engineer is started again, it will be back to normal loop
recording.
Note:
1. If battery in a fully charged condition, it can record about 30 minutes video in
Motion Detection
mode. As the device is used, the battery storage capacity
will decrease gradually. This is a normal phenomenon for the battery.
2. The video files taken in Vibration Detection mode will be saved in Event
recording folder, which will not be overwritten by normal video files.
3. The video files taken in Motion Detection mode will be saved in normal
recording folder.