17
3.1.2 Parking Mode
If Parking Mode is activated, when manual power off, or turned off the car
adapter when the device is turned on, the system alert message “Press
OK Key to enter Parking Mode after 10sec .” will be displayed on the
screen . This means the system will enter Motion Detection automatically
in 10 seconds; when the device detects any motion or collision in front of
lens, Video Record will be activated for a duration the same as the length
setting .
To set the parking mode, do the following:
1 . Press the button to enter the OSD menu .
2 . Press the / button to select
Parking Mode
and press the
OK
button .
3 . Press the / button to select Motion Detection/ Parking Collision/ Dual
Mode and press the
OK
button .
4 . Press the button to exit the menu .
Note:
1 . When the battery is fully charged and is in good condition, Motion
Detection can record continuously for about 30 minutes .
2 . As the device is used, the battery storage capacity will decrease gradually .
This is a normal phenomenon for the battery
3 . The LCD will be off in 30 seconds after the Motion Detection function is
enabled .
