31
Button function
Parameters for the camera in video mode:
•
Video resolution:
Here you can define the resolution of your recordings . (When the slow-motion
function is on, playback of your recording depends on the resolution frame rate . The higher this rate is
(up to max . 240 fps), the slower you can play back the video) .
•
Video length of loop recording:
Here you set the length of your loop recording (only available in
loop mode) .
•
Recording interval of the timelapse recording:
Here you set your recording interval in timelapse
mode to determine the speed of the timelapse video (only available in lapse mode) .
•
Electronic image stabilisation:
With image stabilisation switched on, the video recording is smooth
(not adjustable in every video mode and resolution) .
•
Distortion Correction:
This function straightens out the distortion at the edge of the image caused
by the wide-angle lens (not adjustable in every video mode) .
•
White balance:
Adjust different white balances for optimal results .
•
Exposure compensation:
You can set this between -3 (image becomes darker) and +3 (image
becomes lighter) .
•
Video length of timelapse recording:
Here you can set the duration of your recording in timelapse
mode (only available in lapse mode) .
•
Measurement mode:
Here you can set the image area on which the camera focuses, e .g . at different
points, in the centre, at a point or in a matrix .
•
Contour sharpness:
You can set the sharpness between low, medium and high .
•
Video quality:
You can set the video quality between low, medium and high .
•
ISO sensitivity:
ISO can be adjusted automatically or manually between 100 and 6400 (not adjustab-
le in every video mode) .
•
Time watermark:
You can add a date and time display to your recordings (not adjustable in every
video mode) .
•
Voice recording:
when it is switched on, sound is recorded; when it is switched off, recordings are
without sound (not adjustable in every video mode) .
