9
8
NAME OF PARTS
ATTACHING THE STRAP(Fig. 1)
1. Insert the loop at the end of the Strap under the
Strap Eyelet.
2. Insert the other end of the Strap through the
loop and tie the Strap onto the Strap Eyelet.
INSERTING THE BATTERY
1. Open the Battery Chamber Cover in the direc-
tion of the arrow by pulling it out.(Fig. 2)
2. Insert the AA-size batteires.checking that(+)
and (-) on the battery are aligned according to
the polarity information Inside the Battery
Chamber.(Fig. 3)
3. Close the Battery Chamber Cover by pushing
it until it latches.
bn
Film Take-up Spool
bo
Finder Eyepiece
bp
Flash ready monitor
bq
Film Rewind Shaft
br
Film Chamber
bs
Film Guides
bt
Tripod Socket
ck
Battery Chamber Cover
cl
Strap Eyelet
cm
Film Check Window
cn
Back Cover
co
Battery check lamp
1
Built-in Flash
2
Lamp for Red-Eye-Reduction /Self-timer
3
Film Counter Window
4
Mid-roll Rewind Button
5
Self-timer Button
6
Shutter Release Button
7
Auto-focus Sensor Windows
8
Auto Exposure Metering Window
9
Viewfinder Window
bk
Lens Cover/Lens
bl
Lens Cover Switch
bm
Back Cover Lock
NOTES:
• Do not use Nickel Cadmium batteries.
• With the battery Inserted lncorrectly,the camera
will not work.Make sure the battery is installed
as shown in Fig.3.
• Remove AA batteries from the camera when you
do not expect to use it for a long period time.
• Don't try to break up or recharge the battery or
throw it into fire.
• Keep the battery out of the reach of children.
• Please replace the battery,while flash charging
time is longer than 10 seconds.
¥…'RƒW-1
10/5/00, 9:06 AM
8-9