20
| Automate
™
Programming Instructions | MT03-0302-067001
ROLLEASE ACMEDA
8
TROUBLE SHOOTING
Problem
Cause
Remedy
Motor is not responding
Remote control battery is
discharged
Replace battery
Battery is inserted incorrectly
into remote control
Check battery polarity
Radio interference/shielding
Ensure remote is positioned
away from metal objects and the
antenna on motor is kept straight
Motor distance is too far from
remote control
Move Remote to a closer position
Battery power depleted
Recharge with AC adapter
(Optional)
Incorrect wiring
Check that motor wiring is
connected correctly (refer to motor
installation instructions)
Motor beeps 10 times when in use
Battery voltage is low / Solar
Panel issue
Solar Panel not providing enough
power
Check connection and positioning
of Solar panel. Ensure sun
exposure is adequate.
Recharge with AC adapter
(Optional)
No output Voltage from round
connector
Not enough light
Turn the orientation of Solar Panel
2.0 for more light energy
Round connector is open circuit
Connect battery motor for 5
minutes to check charge current
Motor battery capacity is full
Run the motor continuously until
the battery voltage is below 12V
No output of USB connector
Round connector is charging
battery motor
Disconnect the motor from the
round connector
ROLLEASE ACMEDA | AUSTRALIA
110 Northcorp Boulevard,
Broadmeadows VIC 3047
T +61 3 9355 0100 | F +61 3 9355 0110
ROLLEASE ACMEDA | USA
200 Harvard Avenue
Stamford, CT 06902 6320
T +1 203 964 1573 | F +1 203 964 0513
ROLLEASE ACMEDA | EUROPE
Via Conca Del Naviglio 18, Milan
(Lombardia) Italy
T +39 02 8982 7317 | F +39 02 8982 7317
[email protected]
rolleaseacmeda.com
