manualshive.com logo in svg

rollease acmeda AUTOMATE MT01-2101-069002, Руководство пользователя, Страница: 4 / 30

Поделиться
Скачать
rollease acmeda AUTOMATE MT01-2101-069002 Скачать руководство пользователя страница 4

4 

| Automate

™

 Programming Instructions | Modular Curtain Motor 

ROLLEASE ACMEDA

SAFETY INSTRUCTIONS

WARNING: Important safety instructions to be read before installation.

Incorrect installation can lead to serious injury and will void manufacturer’s liability and warranty.

CAUTION

• 

Do not expose to moisture or extreme temperatures.

• 

Do not allow children to play with this device.

• 

Use or modification outside the scope of this instruction manual will void warranty.

• 

Installation and programming to be performed by a suitably qualified installer.

• 

For use within curtains and drapes.

• 

Use only Rollease Acmeda hardware.

• 

Before installation, remove any unnecessary cords and disable any equipment not needed for powered operation.

• 

Ensure torque and operating time is compatible with end application.

• 

Do not expose the motor to water or install in humid or damp environments.

• 

Motor is to be installed in vertical application only.

• 

Do not drill into motor body.

• 

The routing of cable through walls shall be protected by isolating bushes or grommets.

• 

Ensure power cable is clear and protected from moving parts.

• 

If cable or power connector is damaged do not use.

• 

Ensure all mechanical connections are secure.

Important safety instructions to be read prior to operation.

• 

It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.

• 

Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge 
should not be allowed to use this product.

• 

Keep remote controls away from children.

• 

Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.

• 

Keep motor away from acid and alkali.

• 

Keep clear when in operation.

Do not dispose of in general waste. 

5005833

Содержание AUTOMATE MT01-2101-069002































Отзывы:

Нет отзывов