rolleaseacmeda.com
© 2017 Rollease Acmeda Group
7.
For each shade that the “Automate
TM
Pulse Hub” has added to the connections, add an “Automate
TM
Pulse Shade” driver to the project
8.
Bind the “Automate
TM
Pulse Shade” drivers to the “Automate
TM
Pulse Hub”
a.
You can use the “Jog” action to more easily identify shades
b.
Once the connection has been bound, the driver will automatically populate shade properties
9.
Set the ‘Shade Movement Type’ to ‘Move’ or ‘Rotate’ in order to determine what the driver should Control.
a.
‘Move’ will control basic shade movement
b.
‘Rotate’ will control the motor rotation
10.
Run the ‘Calibrate’ action on the shade, this will inform the driver of how long it takes for the shade to open and close
11.
Refresh Navigators
CONTROL4 MOTOR DRIVER INSTALLATION
AUTOMATE
TM
CONTROL4 DRIVER GUIDE
Simple installation of the hub driver, connect the serial binding and select the hub
Responsive serial communication
Automatically calculates the travel time of the motors accurate to within 50ms
PROPERTIES
Property
Description
Auto Update
Enables or disables real time updates of the driver
For support of this property the annex4 LiNK driver is required
Driver Version
The current version of the driver
Properties
The server version of the driver
For support of this property the annex4 LiNK driver is required
Debug Mode
Reports information to the log and Lua output window
Modes
Debug
Reports the data being moved around
Trace
Reports the flow of the driver
Info
Reports important pieces of information
Warning
Reports any small issues that arise
Error
Reports any large issues that arise
Fatal
Reports issues that cause the driver to fail
Hub Address
The hub address that the driver is primarily communicating to
If only 1 hub is on the serial connection it will be automatically selected when the serial connection is bound
Detected Shades
Lists the addresses of all shades discovered on the hub
Terminal
Allows the dealer to manually send commands to the automate hub
Commands should be formatted with a starting ! and an ending ;
Responses will show in the property after a couple hundred milliseconds
