background image

Page 10

CHAINHOLD INSTALLATION

The tension device must be installed to make the shade fully operable.

Before doing anything, you must first slide the tension device to the bottom of 

the bead chain.

While holding the tension device in one hand, pull the plunger away from the 

bead chain with the other hand. Lift the bead chain out of the bead locking groove 

and slide the tension device to the bottom of the chain loop.

Pull the tension device down until the bead chain is fully tensioned (plunger will 

be at the top) and then move the tension device up approximately 1⁄8”.

Mark the screw hole locations on the wall with a pencil.

IMPORTANT: When attaching to wood, included screws can be screwed directly into wood. When attaching to drywall 

or metal, use anchors that are designed for such substrates. See your hardware store or supplier for guidance on 

appropriate anchors for your substrate.

INSIDE MOUNT

If mounting into wood, pre-drill screw holes and then install the tension device 

using the 2 large screws provided.

If not securing into wood, use appropriate anchors for the substrate and follow 

anchor manufacturer’s instructions.

OUTSIDE MOUNT

Align the mounting bracket sight holes with the pencil marks.

If mounting into wood, pre-drill screw holes and then install the mounting 

bracket using the 2 large screws provided.

If not securing into wood, use appropriate anchors for the substrate and follow 

anchor manufacturer’s instructions.

Press the tension device onto the mounting bracket posts. Carefully install the 

2 small screws provided, through the tension device into the mounting bracket 

using a Phillips head screwdriver.

DO NOT OVER-TIGHTEN.

• 

Pencil

• 

Phillips head

• 

screwdriver

• 

Tape measure

• 

Power drill

Plunger

Bead locking 

groove

2 LARGE SCREWS

for inside and 

outside mount

2 SMALL SCREWS

for outside

mount

OUTSIDE MOUNT 

BRACKET

for outside mount

CHAINHOLD

 PARTS INCLUDED

 TOOLS REQUIRED

 STEP 1: POSITION TENSION DEVICE

 STEP 2: MOUNT TENSION DEVICE

Sight holes

Screw holes

Содержание 3000 HT

















Отзывы: