Rolladeck Industries GAME CHANGER, Руководство по сборке

Страница: 10 / 13

To begin cutting, push the anchor tongs into the urethane of the
entry point of the cutting element and keep the drill handle pitched
back towards the entry point so the top of the anchor blade is
further away from the starting point then the rest of the tool. This
will give the user leverage to engage the anchor tongs into the
urethane and prevent slipping. Pull the trigger and watch as the
cutting line approaches the anchor tongs, reverse the direction and
unwind enough slack to reposition the tool to the desired point and
resume cutting. Be careful not to allow the line to reach the anchor
tongs as it can get caught on the tongs and break the cutting line.
When reaching a corner and making a turn, bring the cutting line
as close to the corner as posible without snagging the anchor tongs.
This will make it easier to transition the cut around the corner.
When ready to reposition the tool to make the cut up the driver’s
pillar, put the anchor blade into the top corner at a 45 degree angle.
Depending on the angle and the density of the bottom corner bead,
it may require extra force to keep the anchor tongs locked into the
urethane until the corner cut is completed.