User Manual of Network Camera
102
By default, the Baud Rate is set as 9600 bps, the Data Bit is 8, the stop bit is 1 and
the Parity and Flow Control is None.
Note:
The Baud Rate, PTZ Protocol and PTZ Address parameters should be
exactly the same as the PTZ camera parameters.
10.9
Service Settings
Purpose:
Service settings refer to the hardware service the camera supports, and it varies
according to the different cameras.
Steps:
1.
Enter Service Settings interface.
Configuration> Advanced Configuration> System > Service
Figure 10-17
Service Settings
2.
Check the checkbox of
Enable IR Light
to enable the IR light service for the
cameras supporting IR LED
3.
Check the checkbox of
Enable Telnet
to enable the remote login by the telnet,
and uncheck the checkbox to disable the telnet.
4.
Click
Save
to save the new settings.
Содержание RBOF2-1W
Страница 1: ...9 Network Camera User Manual...
Страница 88: ...User Manual of Network Camera 87 Figure 7 8 Snapshot Settings...
Страница 106: ......
