12
Seaboard RISE Creator Manual
Getting started
2.8 DC Connection and Charging an External Device
Connecting the
RISE
directly to a power source through an
external mains power supply charges the battery as well as
any device that is attached to the
RISE
ure 15). Connecting directly to a power source will charge the
battery faster (taking approximately three hours) than if you
charge through a USB connection to a power-supplied device.
The
RISE
comes with a USB cable, but it does not include an
external mains power supply. Please refer to the specifications
below before purchasing one.
Measurements for DC power input:
•
Outside diameter:
4mm
•
Internal diameter:
1.7mm
•
Shaft length:
11mm
•
Input voltage for external power supply:
100-240V AC
•
Output voltage for external power supply:
9-12V DC
24W centre pin positive
2.9 Bootup of the RISE
The
RISE
calibrates during bootup. Please refrain from touch-
ing the
keywave surface
until the boot animation has finished.
This will take about two seconds.
Figure 15
In addition to USB, the
Seaboard RISE
can be charged via a DC power supply
(not included).
