3.3 Incorporating Other BLOCKS
3.4 Examples of Different Configurations
4. Care and Maintenance
4.1 Cleaning the Lightpad Block
Basic care and attention will protect your Lightpad Block and help it stay in optimal condition.
Keep it away from direct sunlight, sharp objects or edges,corrosive solvents, liquids, and
especially oils - including greasy fingers after eating food. The lightpad surface is designed
for finger and hand pressure/impact, but NOT for hard objects, such as drum sticks.
To clean the
Lightpad Surface
you may use a damp, bleach-free and oil-free cleansing
wipes. Do not use any abrasive cleansing agents on the Lightpad Block.
4.2 Information About the Battery
The Lightpad Block features a Lithium Ion battery (2,000 mAh) capable of powering the
Lightpad Block for the period in excess of four hours when fully charged. Using USB3 power
supply, the battery will charge nominally within three hours. However it will take longer (five
hours) if the device is connected via USB2. If additional Blocks are connected the charging
time will increase accordingly, as the current is shared between all of them. 2 Lightpad
Blocks connected to a single USB charger will take double the time to charge.
The battery will retain over 80% of its capacity for over 300 charge cycles.
A charge cycle is
defined as a complete discharge from 100% to 0%, and subsequent recharge back to 100%.
For example, charging a device going from 50% charge up to 100% and back twice would
be equivalent to one charge cycle.
5. ROLI Support & Feedback
5.1 noise.fm
noise.fm is the online environment where creators can interact with each other, save NOISE
clips, presets and projects, download additional content, and browse other noise.fm users
