Roland ZBX-500, Руководство пользователя

Страница: 5 / 30

4
Do not use the safety cover if it is
cracked.
If you find a crack, contact your autho-
rized Roland DG Corp. dealer or
service center immediately. Do not attempt to move with the
MDX-500 or PNC-3200 inserted into
the safety cover.
Breakage of the cover may cause the MDX-
500 or PNC-3200 to fall, resulting in injury.
If you are using the safety cover,
detach the key connector from the
MDX-500 or PNC-3200.
Unintended operation may cause injury.
Do not touch the tip of the blade
with your fingers.
Doing so may result in injury.
If operation continues even after you
open the safety cover, wait until
operation stops.
Doing so may result in injury.
If MDX-500 the MDX-500, do not
insert your fingers between the T-
slot table and the arm or between
the heads and the Z-axis cover.
The fingers may be pinched, resulting in
injury.
Head
Z cover
T-slot table
Arm
Perform dry cutting with no cutting
oil.
Such materials can
cause fire.
Do not touch the tool immediately
after cutting operating stops.
The tool may have become hot due to
friction heat and may cause burns if
touched.
Base
XY Table
Head
Z Cover
If PNC-3200 the PNC-3200, do not
insert the fingers between the XY
table and base or between the head
and Z cover.
The fingers may be pinched, resulting in
injury.