3
You can utilize DVD-R/RW discs for the following two VS-2480DVD functions.
Project back up
Please see “BACKUP” on p.105 of VS-2480 owner’s manual.
◆
In case you are using DVD-R discs
In the same way as with CD-R discs, you can carry out a backup onto a DVD-R disc only once. You cannot amend or delete
the backup data.
◆
If DVD-RW discs already contain data
In the same way as with CD-RW discs, you cannot add project data to the blank part of a DVD-RW disc that already
contains some data. Before using such discs for backup, all of the data on the disc must be erased. If such a disc is
loaded, the “CD-RW Erase?” dialog appears during the operation.
Pressing ENTER/YES will execute erasure of the data contained on the disc and start the backup.
◆
Time it takes to perform backup
The amount of time required to perform a backup depends on the type of discs used.
The time stated below will be how long it takes to back up a 4 GB project.
*1 On/Off of Verify can be set on the PROJECT BACKUP screen.
*2 Writing time differs depending on type or manufacturer of discs.
*3 If the size of the project exceeds the storage capacity of one CD-R/RW disc, it will be backed-up across multiple CD-R/RW discs.
Project recover
Please see “RECOVER” on p.107 of VS-2480 owner’s manual.
All the speed parameters for writing and reading are set to “MAX” automatically in all the operations
using the DVD multi drive.
Type of Disc
Verify
*1
Time to write
*2
DVD-R
Off
Approx 40 minutes
On
Approx 70 minutes
DVD-RW
Off
Approx 60 minutes
On
Approx 90 minutes
CD-R
Off
Approx 140 minutes
*3
On
Approx 160 minutes
*3
CD-RW
Off
Approx 150 minutes
*3
On
Approx 180 minutes
*3
Functions for utilizing DVD-R/RW discs
Writing and reading speed from/to discs
VS-2480DVD_e.fm 3 ページ ２００５年７月１３日 水曜日 午前１１時１８分
