13
Here’s how to read the settings of a Organ Tone from the VR-09 into
VR-09 Editor, and edit those settings.
1.
Tap the
[READ]
button .
The Organ Tone parameters will be sent from the VR-09 to VR-09 Editor.
The current Organ Tone parameter settings of the VR-09 will appear in
VR-09 Editor.
MEMO
•
If you’ve operated the VR-09 itself, tap the
[READ]
button. The current
state of the VR-09 will be read into VR-09 Editor.
•
When used in combination with a Synth Tone, you can tap the
[SYNTH]
button to switch the display to the Synth Tone.
2.
Edit the parameters .
The edited parameters will be sent to the VR-09. Parameter settings are
reflected on the VR-09 in real time.
Using VR-09 Editor
NOTE
Set VR-09 MIDI IN mode to
“MODE 2.”
Editing a VR-09 Organ Tone
Knobs and harmonic bars
Drag a knob or harmonic bar up/down
to change its value.
MEMO
• Make fine adjustments to the value
by dragging knobs to left or right.
• You can reset the value to its initial
state by rapidly tapping three times.
Buttons and switches
Tap a button or switch to change its
setting.
[READ]
button
MEMO
Parameter editing supports the
“multi-touch”
capability of the iPad.
You can edit multiple parameters
simultaneously.
Roland website “Support Information”
http://www.roland.com/support/
