11
Parameter Guide
TONE COMMON Parameters
TONE COMMON
Vocal Designer
These are the tone parameters that are shown when Carrier Type is set
to “Basic”.
For the parameters shown when this is set to “Custom”, refer to
the tone parameters (RD-PIANO, XV-5080, PR-A, PR-B, PD-C, PR-D,
COMMON, PR-X) in the “JUNO-X Parameter Guide” (PDF).
Parameter
Value
Explanation
Level
0–127
Adjusts the overall volume for the carrier
tone.
Pan
L64–63R
Sets the panning for the tone. A setting of
“L64” pans the sound all the way to the left,
“0” pans the sound to the center, and “63R”
pans the sound all the way to the right.
Coarse Tune
-48–+48
Specifies the pitch in semitone steps
(maximum ±4 octaves).
Fine Tune
-50–+50
Sets the pitch of the sound in one-cent steps
(up to ±50 cents).
Octave
-2–+2
Sets the pitch of the tone’s sound in octaves
(up to ±2 octaves).
