Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 217 / 234

215
Status Monitor Errors
Printer Error
An error has occurred in the machine.
Turn the machine off, and then turn it on again.
• If the error still does not clear after the power is turned back on, contact your authorized
Roland DG Corporation dealer.
Network Interface Error
An error in the Ethernet port network function has occurred.
Turn the machine off, and then turn it on again.
• If the message reappears, contact your authorized Roland DG Corporation dealer.
Maintenance Failed
Head cleaning, head flushing, or other maintenance operations have failed.
Run the maintenance again after clearing the error.
You can clear a maintenance error as follows:
• The machine receives another print job.
• Press the [#Enter] key.
Cannot Recover Error Page
If you resume printing after resetting the garment misfeed error or other errors, printing may not
be correctly performed and a message appears.
Depending on the printing result, resolve the error using any of the following procedures:
If Nothing Printed
If the tray is not automatically ejected, press the [Tray] key and move the tray stand to the
front.
Remove the tray and reload the fabric correctly. After reloading the tray, press the [Start]
key to resume printing.
If printing does not start, adjust the height of the tray, and then press the [Start] key.
See page 58 "
Loading Fabrics ", page 189 " Adjusting the Height of the Tray ".
If Partially Printed
Cancel printing.
See page 86 "
Canceling Printing ".