2
Replace pages 27 through 29 of the
Setup Guide
with this page.
1.
Switch on the power and make the initial settings.
➊
Close the front cover.
➋
Switch on the main power switch.
➌
Hold down
and press the sub power switch.
➍
Use
to select the language you want.
Press
.
➎
Use
to select the unit of measurement you
want (for length).
Press
.
➏
Use
to select the unit of measurement you
want (for temperature).
Press
.
➐
Make sure the two voltage switches are set correctly.
Press
.
ON
LENGTH UNIT
mm mm
TEMP. UNIT
ºC ºC
CHECK HEATER
VOLTAGE SETTING
MENU LANGUAGE
ENGLISH
2.
Clean the heads using the cleaning cartridges.
➊
➀
Use
to select the ink type.
➁
Press
to enable the selection.
➋
➀
Make sure the drain bottle is installed.
➁
Press
.
➌
Insert cleaning cartridges into slots 1 and 2.
SELECT INK TYPE
E-SOL Max 4 COLOR
SET SOL CL-LIQUID
1 2
Flashing
INSTALL
DRAIN BOTTLE
Cleaning cartridge
