6
USING THE UNIT SAFELY
WARNING
Use only the supplied AC adaptor and
the correct voltage
Be sure to use only the
AC adaptor supplied with
the unit. Also, make sure
the line voltage at the
installation matches the
input voltage specified on
the AC adaptor’s body. Other AC adaptors
may use a different polarity, or be
designed for a different voltage, so their
use could result in damage, malfunction,
or electric shock.
CAUTION
Keep small items out of the reach of
children
To prevent accidental
ingestion of the parts listed
below, always keep them
out of the reach of small
children.
•
Accessories
Rubber Feet
Plug Holder
•
Removable Parts
Screws
CAUTION
Handle the ground terminal carefully
If you remove the screw
from the ground terminal,
be sure to replace it; don’t
leave it lying around
where it could accidentally
be swallowed by small
children. When refastening the screw,
make that it is firmly fastened, so it won’t
come loose.
Placement
•
Depending on the material and
temperature of the surface on which
you place the unit, its rubber feet may
discolor or mar the surface.
Repairs and Data
•
Before sending the unit away for
repairs, be sure to make a backup of
the data stored within it; or you may
prefer to write down the needed
information. Although we will do our
utmost to preserve the data stored in
your unit when we carry out repairs,
in some cases, such as when the
memory section is physically damaged,
restoration of the stored content may
be impossible. Roland assumes no
liability concerning the restoration of
any stored content that has been lost.
IMPORTANT NOTES
Additional Precautions
•
Any data stored within the unit can be
lost as the result of equipment failure,
incorrect operation, etc. To protect
yourself against the irretrievable loss
of data, try to make a habit of creating
regular backups of the data you’ve
stored in the unit.
•
Roland assumes no liability concerning
the restoration of any stored content
that has been lost.
•
This unit allows you to switch lights
at high speed. For some people,
viewing such lights can cause
headache, nausea, or other discomfort.
Roland Corporation will accept no
responsibility for any such health
problems that may occur in yourself or
in viewers.
•
Do not use connection cables that
contain a built-in resistor.
Intellectual Property Right
•
Roland is either registered trademarks
or trademarks of Roland Corporation
in the United States and/or other
countries.
•
Company names and product names
appearing in this document are
registered trademarks or trademarks
of their respective owners.
•
This product includes third party open
source software.
Copyright © 2009-2018 Arm Limited. All
rights reserved.
Licensed under the Apache License,
Version 2.0 (the “License”);
You may obtain a copy of the License
at http://www.apache.org/licenses/
LICENSE-2.0