manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 94

 

7—Project and Drive Operations

 

94

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

In the project list, you can also see all of the projects on the currently selected drive. The 
VS-2480 provides information about each project.

 

Selecting an Item in the Project List

 

To select a project or drive shown in the project list:

1.

Press 

 

 

 or 

 

 

 or turn the TIME/VALUE dial until the desired item is outlined.

When an item is outlined and has an arrow pointing to it from the right, it’s selected.

 

To Display the Projects on a Drive

 

1.

Select the drive. When a drive is selected, the LIST button appears 
in the screen’s lower-right-hand corner.

2.

Press LIST—the VS-2480 displays a list of the projects on the drive.

 

About “Store Current?” Messages

 

During the course of most PROJECT menu operations, the VS-2480 asks you:

The VS-2480 displays this message when an operation needs to temporarily borrow the 
part of the VS-2480’s memory that holds the currently loaded project—after the 
operation is complete, the VS-2480 re-loads the project from your hard drive. If you’ve 
made any changes to the project since you last stored it, press ENTER/YES in response 
to this message to ensure that those changes aren’t lost.

To learn how to connect a CD-R/RW drive or a Zip drive to the VS-2480, see Page 381.

If you encounter error messages when working with a CD-R/RW drive or a Zip drive, 
check Page 353 or the 

 

VS-2480 Appendices

 

 to learn what the messages mean.

We’ll discuss write-protection, project sample rates and recording modes later on in 
this chapter.

To view the contents of an audio CD, see “The CD Player Feature” on Page 353.

If a project is write-protected (Page 99), this message doesn’t appear, since the project is 
locked to prevent the making of any changes to it.

Size

Write-protect status

Sample rate

Name

Recording mode

Creation date and time

Type of project

PROJECT menu 

F6 (LIST)

Project name

Position in project list

Sample rate and 
recording mode

VS2480OMUS.book 94 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды