manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 99

 

7—Project and Drive Operations

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

99

 

8.

Press F5 (OK). The VS-2480 displays:

9.

To proceed, press ENTER/YES, or press EXIT/NO to cancel the operation.
The VS-2480 asks if you want to store the current project before creating and 
loading the new one.

10. Press ENTER/YES to save any changes you’ve made to the currently loaded project, 

or press EXIT/NO to create and load the new project without saving the old one.

 

NAME

 

You can re-name the currently loaded project. On the PROJECT NAME screen, you can 
also enter a comment about the project and view assorted project information.

 

Re-Naming a Project

 

1.

Press PROJECT.

2.

If “NAME” isn’t visible above F3, press PAGE until it is.

3.

Press F3 (NAME)—the PROJECT NAME screen appears.

4.

Enter the desired name as described in “Naming” on Page 73.

 

Entering a Project Comment

 

1.

On the PROJECT NAME screen, select the Comment box and enter the desired 
comment the same way you’d enter a name.

 

PROTECT

 

You can lock a project on your hard drive to protect its data from being 
accidentally overwritten, and to prevent accidental erasure of the 
project. This is called “write-protecting” a project. You can also unlock a 
project using the same procedure.

PROJECT menu 

F3 (NAME)

PROJECT menu 

F4 (PROTEC)

VS2480OMUS.book 99 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды