manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 238

 

18—Editing Tracks

 

238

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

When a phrase or region is selected, it’s outline becomes dotted.

 

Where Editing Takes Place

 

You’ll edit tracks on the VS-2480’s Home screen—see Chapter 8—or on the wave 
display, described on Page 238. Each screen offers a different view of a project’s audio.

 

The Wave Display

 

The wave display is a companion to the Home screen’s playlist and can be opened 
whenever the Home screen is visible.

To open and close the wave display:

1.

Press HOME•DISPLAY.

2.

Press WAVE DISPLAY—the button lights and the wave display fills the bottom of 
the screen, with the upper part of the Home screen and its F buttons still visible.

3.

To close the wave display, press WAVE DISPLAY again—its light turns off and the 
lower portion of the Home screen reappears.

The wave display provides a highly magnified view of a track’s audio in which you can 
often literally see the audio event you’re looking for. The waveform in the display is the 
track’s audio interpreted in graph form. The graph’s vertical axis represents volume, or 
“amplitude.” Its horizontal axis represents project time.

Here’s how to get around on the wave display.

If you select audio on one of a pair of linked tracks, the audio on the other linked track 
is also selected. 

Press STOP before opening or closing the wave display. The WAVE DISPLAY button is 
disabled when a project is playing.

 

To:

Do this:

 

view the desired track

Use the 

 

 

 and 

 

 

 buttons.

zoom in or out vertically

Hold down SHIFT and press 

 

 

 or 

 

 

, respectively

zoom in or out horizontally

Hold down SHIFT and press 

 

 

 or 

 

 

, respectively

Selected phrases

Selected regions

When audio is selected, it has a dotted outline. If its 

track is also selected, it’s white. If not, it’s black.

Track name

Vertical

magnification

Phrase name

Horizontal 
magnification

Track

number

Position bar

Timeline

VS2480OMUS.book 238 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды