manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 222

 

16—Using Effects

 

222

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Preset and User Effect Patches

 

The VS-2480’s memory contains 250 “preset” patches designed to meet a wide range of 
effect-processing needs. The preset patches can’t be erased or modified—though you 
can use them as the basis for your own patches—so they’re always there for you to use.

You can also store 200 of your own “user” patches in the VS-2480’s memory.You can 
create these patches starting with the onboard effect algorithms—see “Starting from 
Scratch” below—or customize preset patches for your own use and save them as your 
own new user patches. Your collection of user patches is available in any project.

 

Starting from Scratch

 

The VS-2480’s 36 effect algorithms (Page 54) are the foundation on which effect patches 
are built. To build your own effect patch from scratch, begin with one of the first 36 
preset patches: P000-P035. These patches use each algorithm’s default settings.

 

Effect Patch Prefixes, Numbers and Names

 

Each effect patch is named using a specific set of naming conventions that provides 
information about the patch. Each patch has a:

•

 

prefix

 

—that tells you if it’s a preset patch or a user patch. If the patch’s name starts 

with a “P,” it’s a preset patch. If it starts with “U,” it’s a user patch.

•

 

number

 

—that shows you the patch’s position in the patch list.

•

 

name

 

—that describes the patch. If the patch isn’t a default patch (see above), its 

name is preceded by an abbreviation that tells you the algorithm it’s based on. A 
default patch’s name is the name of its algorithm.

 

Match the Patch to the Processor

 

Due to the processing requirements of some of the effect algorithms, not all patches 
can be used by all of the processors.

Effect patches based on the following algorithms can’t be selected for the even-
numbered effect processors, Effect 2, 4, 6 and 8:

•

Reverb

•

Gate Reverb

•

Vocoder2 (19)

•

Voice Transformer •

Mastering Tool Kit

Since the following algorithms require two effect processors, they can only be selected 
for odd-numbered processors—Effect 1, 3, 5 or 7—and the selected processor’s even-
numbered partner—Effect 2, 4, 6 or 8, respectively—becomes unavailable for other use:

•

Vocoder2 (19)

•

Voice Transformer

•

Mastering Tool Kit

As shipped from the factory, the VS-2480’s user patches are copies of the first 200 preset 
patches. Since they’re only copies, you can replace them with your own user patches 
without fearing that you’re losing anything. 

In the patch list for the even-numbered processors, any patches based on these 
algorithms are grayed-out and unselectable. 

If on odd-numbered processor uses a patch based on one of these algorithms, the 
EFFECT VIEW box and F button for its even-numbered partner is grayed-out.

VS2480OMUS.book 222 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды