5
Using the Mix In Jack
You can obtain twin pedal performance if you connect the
output from a second KD-7 to the Mix In jack on the first KD-7.
Adjusting the Output Level Control
When the level of a second KD-7 that's been connected to the
Mix In jack does not match that of its partner, you can finely
adjust the output with the output level control. Use a
screwdriver to make the adjustment.
When only one KD-7 is being used, the output level control
should normally be turned to its maximum setting.
Installing the Beater and a
Commercially Available Kick Pedal
This package does not include a kick pedal. Use with a
commercially available kick pedal.
• Take care not to pinch your fingers.
• The tips of the anchor bolts are sharp. Handle with care.
• When used on flooring, the anchor bolts may damage the
floor. Adjust the anchor bolts correctly.
• Install the kick pedal securely.
Specifications
KD-7:
Kick Trigger Unit
Trigger:
1
Dimensions: 172 (W) x 112 (D) x 100 (H) mm
6-13/16 (W) x 4-7/16 (D) x 3-15/16 (H) inches
Weight:
1.3 kg / 2 lbs 14 oz (including beater)
FD-6
(Hi-Hat Control Pedal)
• The tips of the anchor bolts are sharp. Handle with care.
• When using on flooring, the anchor bolts may damage
the floor. Do not attach the anchor bolts.
• When the FD-6 is not going to be used for a long period
of time, move and fix the arm, allowing longer travel for
the pedal.
• To avoid damage, do not leave the FD-6 for extended
periods of time with the pedal plate depressed.
The TD-6 owner's manual assumes use of the FD-7 Hi-Hat
Control Pedal. For each instance in which you find “FD-7”
mentioned in the TD-6 owner's manual, please substitute the
name “FD-6.”
Specifications
FD-6:
Hi-Hat Control Pedal
Dimensions: 160 (W) x 395 (D) x 120 (H) mm
6-5/16 (W) x 15-9/16 (D) x 4-3/4 (H) inches
Weight:
1.4 kg / 3 lbs 2 oz (including anchor bolts)
Commercially Available Kick Pedal
When Using on the Carpet
When Using on the Floor
Beater
Adjusting the Anchor Bolts
Adjusting the Travel of the Pedal
Loosen the nut with the included tuning
key. After adjusting, tighten the nut.
Shift the Arm
deep
shallow
Control Out Jack
Pedal Plate
Attaching the Anchor Bolts
(When Using on the Carpet)
Anchor Bolt
Spring for
the Anchor Bolt