manualshive.com logo in svg

Roland V-Bass 04672434, Руководство пользователя, Страница: 12 / 184

Поделиться
Скачать
Roland V-Bass 04672434 Скачать руководство пользователя страница 12

 

12

 

Names of Things and What They Do

 

fig.00-020

 

1.

 

D BEAM

 

Switches the D Beam on and off. You can add a variety of 
effects to your sounds by moving your hand or the bass neck 
within the range of the beam. (p. 71)

 

•

PITCH Button

 

In addition to changing the pitch of the bass, this can be 
used for the Freeze function, which continuously holds 
the bass’s tone. (p. 73)

 

•

FILTER Button

 

This changes the bass’s tone. (p. 75)

 

•

ASSIGNABLE Button

 

Use this to assign different parameters and functions to 
the D Beam and change the tone in real time. (p. 77)

 

2.

 

LCD

 

Various information regarding the VB-99 is indicated here.

 

3.

 

PATCH/VALUE Dial

 

Used to switch patches and change settings values.

 

4.

 

CATEGORY Button

 

Used to select and change categories. (p. 85)

 

5.

 

FUNCTION Knob F1–F6

 

Changes the value of the setting for the parameter indicated in 
the LCD.

 

6.

 

FUNCTION Buttons F1–F6

 

Used to select the parameters indicated in the LCD.

 

7.

 

BASS DIRECT Button

 

This outputs only the normal pickup sound. (p. 27)

 

8.

 

COSM BASS Buttons

 

These set the COSM bass type and tone. (p. 26)

 

9.

 

POLY FX (Poly Effects) Buttons

 

These set the poly effects. (p. 28)

 

10.

 

FX (Effects) Buttons

 

These set the effects. (p. 28)

 

11.

 

COSM AMP Buttons

 

Used to make settings for the COSM amp. (p. 27)

 

12.

 

MIXER Buttons

 

Used to make settings for the mixer. (p. 31)

 

13.

 

DELAY/REVERB Button

 

Used to make settings for the mixer section’s delay and 
reverb. (p. 32)

 

14.

 

DYNAMIC Button

 

Used for setting the dynamics. (p. 32)

 

Top Panel

3

4

30

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

27

29

23 24

28

25

26

33

31

32

1

2

5

6

VB-99_e.book 12 ページ ２００８年８月１８日　月曜日　午後１時１０分

Содержание V-Bass 04672434

























































































































































































Отзывы:

Нет отзывов