Roland V-Bass 04672434 Скачать руководство пользователя страница 28

Страница: 28 / 184

Chapter 2 Creating Sounds

You can use POLY FX in only one channel at a time (A or B).

Press [POLY FX] for the channel, either A or B,
in which you want to use it.

Press PAGE [

] several times to display Page

fig.01-060d

Switch the function on or off with the [F1] (ON/
OFF) or the F1 knob.

Select the POLYFX TYPE with [F2] (SELECT)
or the F2 knob.

Using [F3] (A/B) or the F3 knob, switch the
channel to the one in which POLY FX is to be
used.

Press PAGE [

fig.01-060d

Each press of PAGE [

] takes you to the settings screen for the

next parameter.

Set the desired parameter with [F1]–[F6] or
with the F1–F6 knobs.

Adjust the parameters until you achieve the
desired sound.

For detailed information on all the parameters, refer to

“POLY FX (Poly Effect)”

(p. 108).

If you want to save the edited settings,
perform the Write procedure (p. 34).

If not saving the values, press [EXIT] to return to the Play screen.

Here’s how to make settings for the effects.

Press [FX].

fig.01-060d

Switch the individual effects on or off with the
[F1]–[F6] (ON/OFF).

Each press of PAGE [

] [

] takes you to another effect screen in

which parameter settings are made.

All effects that are on can be alternately switched off
(indicator unlit) and on (indicator lit) together by
pressing [FX].

Press [F1]–[F6] to select the effect you want to
edit.

Adjust the desired parameter with [F1]–[F6] or
the F1–F6 knobs.

Each press of PAGE [

] takes you to the settings screen for the

next parameter.

Adjust the parameters until you achieve the
sound you want.

For detailed information on all the parameters, refer to

“FX (Effects)”

(p. 111).

If you want to save the edited settings,
perform the Write procedure (p. 34).

If you do not need to save the settings, press [EXIT] to return to the

Play screen.

Setting the Effects

POLY FX (Poly Effect)

FX (Effects)

VB-99_e.book 28 ページ２００８年８月１８日　月曜日　午後１時１０分

Содержание V-Bass 04672434

























































































































































































Результаты поиска

Содержание V-Bass 04672434

Отзывы:

Roland V-Bass 04672434, Руководство пользователя, Страница: 28 / 184

Результаты поиска

Содержание V-Bass 04672434

Отзывы: