Roland V-800HD MKII Скачать руководство пользователя страница 50

Страница: 50 / 64

About Other Features

This returns various settings to their factory defaults. If following the instructions for a procedure results in operation that differs
from what is described in the Owner’s Manual, execute a factory reset.

* Executing a factory reset causes all setting values saved up to then to be lost. Please be aware that all settings saved to MEMORY buttons and

still images saved in internal memory are also lost.

Display the System menu.

Press the [MENU] button to display the menu. Use the [CURSOR] buttons to select [System], then press the [ENTER] button to
display the System menu.

Select the Factory Reset menu.

Use the [CURSOR] buttons to select [Factory Reset], then press the [ENTER] button. The message [Push ENTER to execute] appears.

* If the target menu is not displayed, press the left or right [CURSOR] button to change the page.

fig.factory-reset-menu.eps

Execute the factory reset.

Pressing the [ENTER] button executes the factory reset.

Exit the menu.

Press the [EXIT] button several times to quit the menu.

Returning to the Factory-default State

Содержание V-800HD MKII

































































Результаты поиска

Содержание V-800HD MKII

Отзывы:

Похожие инструкции для V-800HD MKII

Бренды по названию

Популярные бренды

Roland V-800HD MKII, Руководство пользователя

Результаты поиска

Содержание V-800HD MKII

Отзывы:

Похожие инструкции для V-800HD MKII

Бренды по названию

Популярные бренды