Roland V-60HD Скачать руководство пользователя страница 34

Страница: 34 / 44

Other Features

Preventing Unintended Operation

(Panel Lock)

This locks operation of buttons and knobs to prevent unintended

operation of the V-60HD.

Select the [MENU] button

“SYSTEM”

“PANEL LOCK.”

With the cursor positioned at “ENTER,” press the [VALUE] knob.

The PANEL LOCK menu appears.

Select a target for panel lock, then use the [VALUE] knob to

specify whether panel lock is applied (ON) or not applied

(OFF).

You can select the following menu items as targets for panel lock.

Menu item

Target of panel lock

ALL SW & VOLUME

All buttons and knobs

MENU SW + EXIT SW

[MENU] and [EXIT] buttons

VALUE ENCODER

[VALUE] knob

PGM/A 1–8 SW

PGM/A bus cross-point [1]–[8] buttons

PST/B 1–8 SW

PST/B bus cross-point [1]–[8] buttons

AUX/MEMORY 1–8 SW

AUX/MEMORY buttons (All)

MODE SW

[MODE] button

CUT SW + AUTO SW

[CUT] and [AUTO] buttons

VIDEO FADER

Video fader

OUTPUT FADE SW

[OUTPUT FADE] button

DSK ON/OFF SW

[DSK] button

COMPOSITION BLOCK

[H/PGM-CTR] and [V/PST-CTR] knobs
[PinP 1], [PinP 2], and [SPLIT] buttons

TRANSITION BLOCK

[MIX], [WIPE 1], and [WIPE 2] buttons
[TIME] knob

DSK BLOCK

[LEVEL] and [GAIN] knobs
[PVW] button

AUDIO IN 1–6 VOLUME

AUDIO INPUT LEVEL knobs (All)

AUTO MIXING SW

[AUTO MIXING] button

MASTER OUTPUT VOLUME

[MASTER OUTPUT] knob

Press the [VALUE] knob to apply the setting.

Repeat steps 3 and 4 as needed.

Press the [MENU] button to quit the menu.

Press and hold the [EXIT] button and the [MENU] button at

the same time (for 3 seconds or longer).

The message “PANEL LOCKED” is displayed,

and panel lock is turned on. The button and

controls that you set to applied (ON) in step

3 are locked.

To turn off panel lock, again press and hold the [EXIT] button

and the [MENU] button at the same time (for 3 seconds or

longer).

The message “LOCK RELEASED” is displayed, and panel lock is

turned off.

Operating the V-60HD by Remote Control

You can operate the V-60HD remotely from an external device.

Using the dedicated V-60HD RCS program

You can connect the V-60HD to a computer via a LAN or RS-232,

and use dedicated program V-60HD RCS to operate the unit by

remote control.
For more information about operation methods, refer to the

owner’s manual included with V-60HD RCS.

RS-232

LAN

V-60HD RCS

V-60HD RCS can be downloaded from the following Roland website.

https://proav.roland.com/

Using RS-232/LAN/GPI

You can operate the V-60HD remotely from an external device by

means of RS-232/LAN (CONTROL port)/GPI.

For the specifications of the RS-232 connector and the TALLY/

GPI connector and for more information on operating the unit

remotely, refer to the Reference Manual (PDF), available for

download at the Roland website shown above.

Outputting a Tally Signal

You can output a tally signal from the TALLY/GPI connector.

A tally signal is output from the connector pin corresponding to

the video channel being output, also including video composition

and transition effects.

For the specifications of the TALLY/GPI connector, refer to the

Reference Manual (PDF), available for download at the Roland

website shown above.

Содержание V-60HD













































Результаты поиска

Содержание V-60HD

Отзывы:

Похожие инструкции для V-60HD

Бренды по названию

Популярные бренды

Roland V-60HD, Руководство пользователя

Результаты поиска

Содержание V-60HD

Отзывы:

Похожие инструкции для V-60HD

Бренды по названию

Популярные бренды