11
CY-12R/C (V-Cymbal)
prevents the cables from catching or getting tangle on the
stand.
fig.CY-03.e
2.
Attach the CY-12R/C so the unit is oriented as
shown in the diagram (bolt should be opposite the
output jacks).
3.
Tighten the wing nut to obtain the desired
movement.
Use the included felt washer and the wing nut.
fig.CY04.e
• Double sounding may occur if the wing nut is loose.
• Do not use the washer or felt included with the drum
stand (MDS series).
About the Output Jacks
The CY-12R/C features two different output jacks, BOW/BELL
and BOW/EDGE.
Use the BOW/BELL output jack when you want to play the
bow and the bell sounds (used as a ride cymbal); use the BOW/
EDGE output jack when you want to play the bow and the edge
sounds (used as a crash cymbal).
Use either the BOW/BELL or BOW/EGDE output jack, but
not both at the same time. Connecting both jacks results in two
separate trigger inputs playing simultaneously.
Playing the CY-12R/C
Bow Shot
This is the most common playing method, playing the pad face
of the cymbal. It corresponds to the sound of the “head-side” of
the connected trigger input.
Edge Shot
This playing method involves striking the edge with the
shoulder of the stick. It corresponds to the sound of the “rim-
side” of the connected trigger input.
To make use of edge shot, you'll need to connect to a trigger
input jack on the percussion sound module that
accommodates rim shots.
Bell Shot
This playing method involves striking the bell. It corresponds
to the sound of the “rim-side” of the connected trigger input.
• To make use of bell shot, you'll need to connect to a
trigger input jack on the percussion sound module that
accommodates rim shots.
• Use the shoulder of the stick when playing bell shots.
Output Jack
Corresponding
Play Methods
Tones Sounded
BOW/BELL
Bow Shot (p. 11)
Head
Bell Shot (p. 11)
Rim
Choke (p. 12)
–
BOW/EDGE
Bow Shot (p. 11)
Head
Edge Shot (p. 11)
Rim
Choke (p. 12)
–
Stopper
(Be sure to
orient it correctly.)
Tighten the bolt with
the included tuning key.
Wing Nut
Felt Washer
Bow
Edge Sensor
Bell
