Roland TD-12K-BK, Брошюра

Страница: 20 / 23

*7 You need to set the “Input Mode” to “HD/RM” (or "H-r" in the RMP-5).
*8 With a Y-Cable (PCS-31L), rim shots are possible with other trigger inputs in addition to Trigger Input 2.
*9 You need to select “PD-120” for trigger type settings.
*10 Positional sensing on rim is available.
*11 With dedicated cables (RD/RDB), you can perform using three different tones: bow, bell, and edge.
*12 Compatible with “PAD/RIM” dual-triggering feature in EXT TRIG mode.
*13 TD-9 uses a dedicated D-Sub connection cable for input; separate Crash 2 and AUX inputs are also provided.
3 9
*pos.: Positional sensing is available.
*To enable rim shot, edge shot, bell shot and choking techniques, you'll need to connect the pad with the stereo cable.
*1 Does not support rim shots.
*2 Supports Cross Sticks.
*3 Supports brush sweep techniques.
*4 Connect to the BOW/EDGE output jack for edge shots; connect to the BOW/BELL output jack for bell shots.
*5 With two cables, you can perform using three different tones: bow, bell, and edge.
*6 With a Y-Cable (PCS-31L), you can connect two pads to a single trigger input jack. However, rim shots, choking and edge or bell shot on each pad or cymbal are not available for use.
3 8
You need to select the suitable “Trigger Type (Pad Type)” on the sound module for your pad.
About the table
Yes No