Roland TD-11 Скачать руководство пользователя

Страница: 49 / 56

Error Messages

If an error message is displayed in the TD’s screen, the TD was unable to operate correctly or was operated inappropriately.

Take the appropriate action listed below.

Message

Meaning

Action

Error messages related to MIDI

MIDI buffer full .

A large amount of MIDI messages was received

in a short time, and the TD was unable to

process them.

Reduce the amount of MIDI messages being transmitted

to the TD.

MIDI Tx buffer full .

Due to the excessive amount of data that the

TD needed to transmit, MIDI messages could

not be output correctly.

Reduce the amount of data being transmitted.

Error messages related to USB

USB memory full .

The USB flash drive does not have enough

free space.

Either delete unneeded data, or use another USB flash drive.

Check the USB memory .

The USB flash drive is not working correctly.

Check the USB flash drive.

Could not read this file .

The specified data does not exist on the USB

flash drive. Alternatively, the saved data has

been damaged.

Check the USB flash drive.

Unsupported format .

The file format or song format is one that the

TD cannot read.

Check the file. For the supported song formats, refer to p. 26.

USB device error .

Either the connected USB flash drive is one

that the TD cannot use, or a foreign object

has entered the MEMORY port and caused an

electrical short.

Immediately disconnect the connection, and check whether

a foreign object might have entered the MEMORY port.

USB memory busy .

Data could not be read fast enough from the

USB flash drive.

• If this error message appears when playing back high

bit-rate MP3 data, or when you’ve raised the playback

speed of MP3 data, you may be able to solve the problem

by lowering the bit rate or setting the speed to normal.

• Use a USB flash drive sold by Roland.

Error messages related to the TD’s internal memory

Internal memory full .

The QUICK REC storage capacity is full, and

recording has stopped.

—

Error messages related to the system

Device error .

There is a problem with the internal system.

Contact your retailer, the nearest Roland Service Center,

or an authorized Roland distributor, as listed on the

“Information” page.

Data memory was damaged .

There is a problem with internal memory.

A factory reset will be executed automatically.

Other messages (* These are not errors)

The module will turn off soon .

The power will soon turn off because of the

“Auto Off” setting.

If you don’t want the power to turn off, press any button or

strike a pad.
You can also disable the “Auto Off” setting so that the power

does not turn off automatically (p. 35).

USB memory is not connected

here .

A USB flash drive is not connected to the TD.

Connect a USB flash drive.

This page is invalid when Std

MIDI Setup Lock is on .

If Std MIDI Setup Lock is ON, the settings of

this page are ignored.

To enable these settings, turn Std MIDI Setup Lock off (p. 37).

Write Protect is ON .

The operation cannot be executed because

Write Protect is on.

If you want to execute this operation, turn Write Protect off

(p. 35).

Not possible if recorded drum

data exists .

This function cannot be used on an internal

song that contains a drum track, or on a song

in which you recorded a drum performance

using the QUICK REC function.

When you reselect the song, the drum performance you

recorded using the QUICK REC function will be erased, and

you will once again be able to use this function.

Содержание TD-11

























































Результаты поиска

Содержание TD-11

Отзывы:

Похожие инструкции для TD-11

Бренды по названию

Популярные бренды

Roland TD-11, Руководство пользователя

Результаты поиска

Содержание TD-11

Отзывы:

Похожие инструкции для TD-11

Бренды по названию

Популярные бренды