background image

 

3

 

101a

 

• The unit should be located so that its location or 

position does not interfere with its proper venti-
lation.

..........................................................................................................

 

104

 

• Try to prevent cords and cables from becoming 

entangled. Also, all cords and cables should be 
placed so they are out of the reach of children.

..........................................................................................................

 

108d: Selection

 

• If you need to move the instrument, take note of 

the precautions listed below. At least two persons 
are required to safely lift and move the unit. It 
should be handled carefully, all the while keeping 
it level. Make sure to have a firm grip, to protect 
yourself from injury and the instrument from 
damage.

• Disconnect all cords coming from external 

devices.

• Remove the unit from the speaker stand.

 

In addition to the items listed under “USING THE UNIT SAFELY”, please read and observe the following:

 

Connection

 

• Before making any connections, be sure all units in the system are OFF. Also be sure that all amplifier and 

mixer volume controls are at MINIMUM.

• Before connecting SST/SSW/SSM Speakers to an 

 

external crossover

 

 read the specification chart carefully.

 

Maintenance

 

• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. 

To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to 

wipe the unit thoroughly with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or 

deformation.

 

Additional Precautions

 

• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is 

late at night).

• To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other 

moisture.

Important Notes

SST-151_e.book 3 ページ 2003年2月24日 月曜日 午後1時36分

Содержание SSM-151









Отзывы: