manualshive.com logo in svg

Roland SJ-1045EX, Руководство пользователя

Поделиться
Скачать
Roland SJ-1045EX Скачать руководство пользователя страница 63

61

Chapter 3  Maintenance and Adjustment

3-5 When Not in Use for a Prolonged Period

Keep Performing Maintenance

Switch On the Power Once a Month

Switch on the sub power once a month. When you turn on the power, the machine automatically performs some
operations such as those to keep the print heads from drying out. Allowing the machine to stand completely
unused for a prolonged period may damage the print heads, so be sure to switch on the power to perform these
automatic operations.

Keep at a Constant Temperature and Relative Humidity

Even when the machine is not in use, keep it at a temperature of 5 to 40˚C (41 to 104˚F) and a relative humidity
of 20 to 80% (with no condensation). Temperatures that are too high may degrade the ink and cause malfunc-
tion. Temperatures that are too low may cause the ink to freeze and damage the heads.

Alarm Feature

This feature is to remind you to switch on the sub power once a month. When
the machine remains unused for about one month, this screen appears and a
warning beep sounds. If this screen appears, switch on the sub power. When
maintenance operations finish, switch off the sub power.

This feature operates when the printer's main power is turned on. We recommend leaving on just the main
power to the printer even when the machine is to remain out of use for a prolonged period.

PRESS THE  POWER
KEY TO  CLEAN

Downloaded From ManualsPrinter.com Manuals

Содержание SJ-1045EX





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды