manualshive.com logo in svg

Roland SF-200, Руководство по установке


Поделиться
Скачать
background image

Introduction

Make sure the machine is connected to the network by an Ethernet cable.
The network settings on the machine must be made manually, using the operation panel. For information about 
how to make the settings, refer to P. 41 "Step 2: Make the Network Settings on the Printer" later in this step.
Also, to perform printing from this machine, the software RIP included with the machine must be installed on the 
computer you are using. For information about installation and setup, refer to the documentation for the software 
RIP.

This machine has a built-in print server as a network interface. When you use the print server, you can send print 
data to the machine from anywhere on the network. TCP/IP is used as the protocol.

IMPORTANT

The examples used in the procedures for making the settings described in this section assume you are using 
one computer and one machine. The procedures and setting values described here may not be suitable for all 
operating environments.
If the computer you are using is connected to a number of networked devices or to the Internet, incorrect 
settings may adversely affect the entire network. For detailed information about the settings, consult your 
network administrator.

Connecting to the Computer

38

2.Installation

Содержание SF-200



















































Отзывы:

Нет отзывов

Похожие инструкции для SF-200

Бренды по названию

Популярные бренды

Загрузить еще бренды