3
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and
observe the following:
Placement
354a
• Do not expose the unit to direct sunlight, place it
near devices that radiate heat, leave it inside an
enclosed vehicle, or otherwise subject it to temper-
ature extremes. Excessive heat can deform or
discolor the unit.
355b
• When moved from one location to another where
the temperature and/or humidity is very different,
water droplets (condensation) may form inside the
unit. Damage or malfunction may result if you
attempt to use the unit in this condition. Therefore,
before using the unit, you must allow it to stand for
several hours, until the condensation has completely
evaporated.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry
cloth or one that has been slightly dampened with
water. To remove stubborn dirt, use a cloth impreg-
nated with a mild, non-abrasive detergent. After-
wards, be sure to wipe the unit thoroughly with a
soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discoloration
and/or deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the
unit’s buttons, sliders, or other controls; and when
using its jacks and connectors. Rough handling can
lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp
the connector itself—never pull on the cable. This
way you will avoid causing shorts, or damage to the
cable’s internal elements.
921
• To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections.
new
• When moving the drum trigger while it is mounted
on a drum, grasp and hold the drum and not the
drum trigger.
new
• Install this product according to the instructions in
the owner's manual. Never insert your fingers into
the opening in the back or touch the circuit board
inside.
new
• To avoid malfunction, never allow the sensor on the
RT-7K or RT-5S to stand for a long time with
diagonal force or severe deformation applied to it.
new
• The output of the acoustic drum trigger is affected
by the head type, head tension, composition of the
shell, place of use, and temperature, and may not
produce sound as played.
962a
*
In the interest of product improvement, the specifi-
cations and/or appearance of this unit are subject to
change without prior notice.
Items in the Package
• Trigger unit
• Cable
• Protective sensor cover (RT-7K, RT-5S)
• Two hoop guards (RT-7K)
• Owner's Manual (this document)
* When carrying the RT-7K or RT-5S, be sure to
attach the included protective sensor cover to
prevent force from being applied to the sensor.
RT-7K5S3T_e.fm 3 ページ ２００４年２月９日 月曜日 午前１１時１９分
