801 West Orchard Drive, Suite 3
Bellingham, WA 98225
WWW.ROLANDSYSTEMSGROUP.COM
TOLL FREE:
800.380.2580
• FAX:
800.634.8202
Architects & Engineers Specifi cation
Accessories
32 in 8 out
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
110 dB
-80 dB
0.05 % or less
(Pad: On, Input Gain: +4 dBu, 22 to 20000 Hz)
-65 to -10 dBu (PAD: Off) -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
Number of Channels
AD Conversion
DA Conversion
Frequency Response
Total Harmonic
Dist Noise
Dynamic Range
Cross Talk
PAD
Input Impedance
Nominal Output Level
Output Impedance
Network Latency
Equivalent Input
Noise Level (E.I.N.)
Residual Noise Level
(IHF-A, typ.)
Recommended Load
Impedance
20 dB On/Off
20 k ohms
+4 dBu, Max. +22 dBu
150 ohms
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
-128 dB
-90 dBu
10 k ohms or greater
Number of Channels
Connectors
8 in 32 out
Frequency Response
AD Conversion
DA Conversion
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Dynamic Range
Cross Talk
Nominal Input Level
Input Impedance
Nominal Output Level
Output Impedance
Recommended Load
Impedance
Residual Noise Level
(IHF-A, typ.)
Network Latency
Total Harmonic
Dist Noise
110 dB
-80 dB
+4 dBu, Max. +22 dBu
30 k ohms
+4 dBu, Max. +22 dBu
600 ohms
375 microseconds when using REAC cable only
(AD - REAC - DA Latency: about 1.2 ms)
10 k ohms or greater
-90 dBu
0.05 % or less (Input Gain: +4 dBu, 22 to 20000 Hz)
Input: 1 (DB-25 type, balanced, 8 channels)
Output: 4 (DB-25 type, balanced, 32 channels each)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
Indicators
AC Power Supply
DC Power Supply
Power Consumption
Dimensions
Accessories
Operation Temperature
Weight
(for an optional external
power supply unit;
Model S-240P)
Current Draw
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
70 W
Power Cord, REAC Connector Covers, Ferrite Cores,
Connector Guard, Screws for Connector Guard
Installation Manual
0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
9.4 kg, 20 lbs 12 oz
482.0 (W) x 386.7 (D) x 133.0 (H) mm
19 (W) x 15-1/4 (D) x 5-1/4 (H) inches
6 A
Nominal Input Level
Sample Rate: 96.0 kHz
Signal Processing: 24 bit
Connectors
Indicator
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
Power Cord, REAC cable (10 m, Cat5e crossover cable)
Adhesive-backed number label sheets, REAC Connector Covers
Ferrite Cores, Owner's Manual
AC Power Supply
DC Power Supply
Power Consumption
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
+24 V (from optional external power supply unit : S-240P):
130 W
Phantom Power
Dimensions
+48 V / 14 mA (each input on SI-AD4, remote controlled)
482.0 (W) x 336.0 (D) x 266.4 (H) mm
19 (W) x 13-1/4 (D) x 10-1/2 (H) inches
Weight
Operation Temperature
17.0 kg, 37 lbs 8 oz
0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
6 A
Input: 32 (XLR type, balanced, phantom power, 4 ch input module x 8)
Output: 8 (XLR type, balanced, 4 ch output module x 2)
REAC: MAIN, BACKUP (RJ-45 EtherCon type)
Remote Connector: 1 (RS-232C, DB-9 type)
MIDI Connectors: IN, OUT (5-pin DIN type)
Current Draw
(for an optional external
power supply unit;
Model S-240P)
EXT Indicator (External Power Supply Unit)
INT Indicator
REAC Indicator
CTRL Indicator
ALARM Indicator
MUTE ALL OUTPUTS Indicator
* 0 dBu = 0.775 Vrms
* 0 dBu = 0.775 Vrms
S-4000S-3208 40CH I/O MODULAR RACK
S-4000H 8X32 FOH UNIT
Connector
Indicators
Power Supply
Dimensions
Weight
Operation Temperature
Accessories
Remote Connector: 1 (RS-232C, DB-9 type)
Supplied from connected device. (S-4000S, S-4000H; through the remote cable)
215.0 (W) x 87.0 (D) x 54.6 (H) mm, 8-1/2 (W) x 3-7/16 (D) x 2-3/16 (H) inches
0.8 kg, 1 lb 13 oz
0 to +40 degrees celsius, +32 to +104 degrees Fahrenheit
Remote Cable (3 m), Rack Mount Brackets, Installation Manual
CLIP Indicators, SIG Indicators, POWER Indicator, REAC Indicator, CTRL Indicator, Level Meter
S-4000R REMOTE CONTROL UNIT
S-4000 Digital Snake System Main Specifications
S-4000S Digital Snake System
