– 3 –
fig.Display.e
If the head has been damaged or no longer maintains correct tension, replace it.
To order replacement heads (
RMP-3 Mesh Head
), contact the retailer from whom you purchased
the unit or the nearest Roland Service Center.
The MH-8 Mesh Head is not compatible and cannot be used.
Replacing the Head
When replacing or tuning, use the included tuning key.
fig.HeadChange
1.
Remove all tuning bolts.
Gradually loosen each one in order, turning them
counterclockwise.
* Do not lose the tuning bolts.
2.
Open the case, and then remove the old head.
3.
Place the new head in the case.
4.
Securely close the case.
5.
Attach all eight tuning bolts.
6.
Adjust the tension of the head. Refer to “Adjusting the Head Tension.”
Pad Size
8 inches
Tempo
20–260
Beat
24 types
Rhythm Types
18 types
Metronome Sounds
5
Coach Mode
Functions: 5
Exercise Variations: 20
Connectors
PHONES/OUTPUT Jack: 1
(Stereo miniature phone type)
MIX IN Jack: 1 (Miniature phone type)
AC Adaptor Jack
Power Supply
DC 9 V:
Dry Battery 6F22/1604 (9 V) type
(carbon)
Dry Battery 6LR61/1604A (9 V) type
(alkaline)
AC Adaptor
Current Draw
55 mA
*
Expected battery life under continuous use:
Carbon: 2 hours
Alkaline: 6 hours
These figures will vary depending on the
actual conditions of use.
Stand Screw Size
M8
Dimensions
263 (W) x 348 (D) x 78 (H) mm
10-3/8 (W) x 13-3/4 (D) x 3-1/8 (H)
inches
Weight
1.2 kg / 2 lbs 11 oz (including a battery)
Accessories
Dry Battery 6F22/1604 (9 V) type
(carbon)
Tuning Key
Owner’s Manual
Leaflet (“USING THE UNIT SAFELY”
and “IMPORTANT NOTES”)
Options
AC Adaptor: BOSS PSA series
Pad Stand: PDS-2
*
In the interest of product improvement, the
specifications and/or appearance of this
unit are subject to change without prior
notice.
About the Display
Replacing the Head
Specifications
Beat
Battery LOW Indicator
Flashes when the battery
power drops.
Trigger Indicator
Appears when the
head is struck.
Count
Tempo/Value
Rhythm Type
Metronome Needle
RMP-3_e 3 ページ ２００５年１月１４日 金曜日 午前１１時１３分
