manualshive.com logo in svg

Roland RG-7, Руководство пользователя

Поделиться
Скачать
Roland RG-7 Скачать руководство пользователя страница 21

 

19

Before You Start Playing

NOTE

 

Using undue force to open the lid when it is locked may 
damage the lid and/or the lock.

 

Turning the lid lock when the lid lock is released while 
the keyboard lid is open may make the keyboard lid 
prone to closing. Always confirm that the keyboard lid is 
covering the control panel before locking the lid.

 

Connecting the Pedal Cord

 

1.

 

Connect the pedal cord to the Pedal connector located 

in the jack panel on the lower left of the RG-7.

 

fig.00-01

 

Connecting the Power Cord

 

1.

 

Connect the supplied power cord to the AC inlet.

 

2.

 

Connect the pedal cord to the Pedal connector.

 

3.

 

Cramp the power cord and pedal cord with Cord 

Cramp 

 and screw 

 at A, B, and C (see the picture 

above).

 

4.

 

Plug the power cord into an AC outlet.

 

Turning the Power On and 

 

Off

NOTE

 

Turn on power to your various devices in the order 
specified. By turning on devices in the wrong order, you 
risk causing malfunction and/or damage to speakers 
and other devices.

 

To turn the power on, turn the [Volume] knob all the 

way down, and then press the [Power] switch.

 

When you turn on the power to the RG-7, the front panel 
display appears as shown below.

After a few seconds, you will be able to play the 
keyboard to produce sound.
Use the [Volume] knob to adjust the volume.

NOTE

 

This unit is equipped with a protection circuit. A brief 

interval (a few seconds) after power up is required 

before the unit will operate normally.

 

To turn the power off, turn the [Volume] knob all the 

way to the left, and press the [Power] switch.

 

The front panel display goes blank, and the power is 
turned off.

 

* If you need to turn off the power completely, first turn off the 

[POWER] switch, then unplug the power cord from the power 
outlet. Refer to “Power Supply” (p. 6).

b

a

a

b

Screw

Cord Cramp

RG-7_e.book 19 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Содержание RG-7





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды