®ÂØÒňÎ
RD-700SX
Digital Piano
TurboStart
TBS 245
©2006 Roland Corporation U.S.
www.RolandUS.com
Page 2
Using the Built-In Rhythms
The RD-700SX has 185 internal rhythm patterns. To
play a rhythm pattern, use the following procedure:
1. Press EXIT several times to go to the main tone
display.
2. Press CURSOR
to display the RHY/ARP
screen.
3. Press the INC/DEC buttons to select a rhythm
pattern.
4. Press F2 (PLAY) to begin playback.
5. Press F2 (STOP) to end playback.
Storing a Setup
The RD-700SX has 100 memory locations in which
you can store your favorite keyboard settings. Use
the following procedure to store a setup:
1. Press WRITE so it lights.
2. Use the CURSOR
and
buttons and the
INC/DEC buttons to name your setup.
3. Press the CURSOR
to move the cursor to the
setup destination field.
4. Press the INC/DEC buttons to select the memory
location in which you want to store your
customized setup.
Note
: The setup currently stored in the selected
location will be overwritten.
5. Press ENTER to display “Are You Sure?”
6. Press ENTER to display “Writing….”
7. The display returns to normal when the writing
procedure is completed.
Recalling a Setup
Use the following procedure to load a previously
saved setup:
1. Press SETUP in the ONE TOUCH area.
2. Press the INC/DEC buttons to select the desired
setup.
Registering and Recalling
Favorite Setups
For setups you frequently use, the RD-700SX has 40
favorite locations you can quickly get to using the
Tone Select buttons. These locations are stored in
four sets, or “banks,” containing 10 favorite locations
each.
Use the following procedure to assign a setup to a
favorite location:
1. Press SETUP and press the INC/DEC buttons to
select a setup.
2. Press F2 (BANK CHANGE) to select the bank in
which you want to register the setup.
3. Hold down F1 (ASSIGN), and then press the
TONE SELECT button to which you wish to
assign the setup.
Use the following procedure to recall a previously
registered favorite setup:
1. Press SETUP.
2. Press F2 (BANK CHANGE) to select the desired
bank.
3. Press the setup’s TONE SELECT button to load
the setup.
