Roland monoFab SRM-20, Руководство пользователя

Страница: 131 / 152

What to Do If . . .
131
The Power Turns Off After Cutting Ends
Is the Auto-Power-Off Function Set Up?
If auto power-off function is enabled on the power option, the power
automatically turns off when a certain period of time elapses with the
machine idle* .
*
“Idle”
means the state in which the movement of the table and spindle
head is stopped (except when a machining process is paused) .
You can disable the auto power-off function or change the set time .
"
”Power Option” (p . 15)
The Cutting Tool Does Not Reach the Material
Are You Using a Scrap Board?
If the cutting tool does not reach the material and cannot cut it, use a scrap
board .
"
“Cutting Material / Scrap Boards” (p . 20)
The Driver Cannot Be Installed
If installation quits partway through, or if the wizard does not appear when
you make the connection with a USB cable, take action as follows .
Windows 8/8 .1
1.
Use a USB cable to connect the machine and the computer, and
then turn the machine on.
2.
If the “Found New Hardware” wizard appears, click [Cancel] to close it.
Disconnect any USB cables for printers other than this machine.
3.
On the task bar, click [Start] , and then [Desk top] . Move the mouse
to the lower right corner to display Charm and click [Set] .
4.
Click [Control Panel] , [Hardware and Sound] , and then [Device Manager] .
When the “User Account Control” dialog box appears, click [Continue] .
The “Device Manager” window appears .
5.
Click
[Show hidden devices]
on the
[View]
menu.
6.
Double-click
[Printers]
or
[Other devices]
in the list. Click the
model name or
[Unknown device]
, whichever appears below the
item you selected.
7.
Click
[Delete]
on the
[Action]
menu.