Roland KC-150 Скачать руководство пользователя страница 6

 

6

 

Panel Descriptions

 

Control Panel

 

fig.01

 

Jack Panel

 

fig.01

 

CHANNEL CONTROL

 

1. CH 1 knob / CH 1 Input Jacks

 

In addition to a 1/4” phone jack, this channel is equipped with 

a balanced XLR connector, useful for connecting microphones.

This accepts input levels ranging from mic input (-50 dBu) to 

line level from sound modules and other equipment (-20 dBu).

 

2. CH 2 and CH 3 knobs / CH 2 and CH 3 

Input Jacks

 

Use these for connecting keyboards, sound modules, and 

other devices. They accept line level input (-20 dBu).

 

3. CH 4 knob / CH 4 Input Jack

 

CH 4 is dedicated to monitoring channel. The signal that is input 

to CH 4 will not be output from the line out jack, but will be 

output only from the internal speaker and from the headphones.

 

You can use the KC-150 for talkback from the main PA or as a 

monitor for live performances on stage or in other locations; this 

is an easy and convenient way to allow only the performer or 

performers to monitor the guide sounds from drum machines.

Use this for connecting keyboards, sound modules, and other 

devices. This accepts line level input (-20 dBu).

 

* If your setup does not use line output, CH4 can be used in the 

same way as the other channels.

 

MASTER CONTROL

 

These adjust the tone and volume level for the built-in 

speakers or for headphones.

 

4. LOW Knob

 

This adjusts the level of the bass range.

 

5. HIGH Knob

 

This adjusts the level of the treble range.

 

6. VOLUME Knob

 

This adjusts the total volume level of the unit’s internal 

speaker. The SUBWOOFER OUT output is also changed.

When connecting headphones, adjust the headphone volume 

level.

 

* The VOLUME knob do not affect the line outs.

 

7. PHONES Jack

 

This is for connecting headphones. The unit’s speakers are 

deactivated when headphones are plugged in.

Also, no signals are output from SUBWOOFER OUT (p. 7).

 

* Always be sure to lower the VOLUME knob to 0 whenever 

connecting and disconnecting headphones.

* Although the PHONES jack accepts stereo plugs, the audio 

output is mono.

2

8

9

1

3

6

5

4

7

1

2

10

3

11

12

KC-150_e_A4.book 6 ページ 2005年4月28日 木曜日 午前9時0分

Содержание KC-150













Отзывы: