Using the Sequencer
29
Creating a Pattern (Note Input)
Input some notes (from the scale on the keys) into the sequencer to create a pattern.
1.
Select the pattern to record (
(P.26)).
2.
Press the [SEQ] button to make the indicator light.
The unit enters sequencer mode (STEP SEQ). The current tempo is shown on the display.
3.
To select the step to record, hold down the desired [1]–[16] button and press the [NOTE] button.
4.
Press the [1]–[13] buttons to input the notes.
Inputting notes using the K-25m (sold separately)
You can use the K-25m (sold separately) to directly input notes (from the scale on the keys) into the steps to record.
1.
Select the pattern to record (
(P.26)).
2.
Press the [SEQ] button to make the indicator light.
The unit enters sequencer mode (STEP SEQ). The current tempo is shown on the display.
3.
Input the notes using the keyboard while holding down the [1]–[16] buttons corresponding to the steps to
record.
For installation/removal/angle adjustment, refer to the K-25m’s Owner’s Manual.
