Roland JU-06A, Руководство по эксплуатации, Страница: 23 / 29

[6] Velocity Curve Sets the keyboard’s touch.
*1
LHT Sets the keyboard to light touch.
(Light)
MED This is the standard keyboard touch
(Medium) setting (default).
HVY Sets the keyboard to a heavy touch.
(Heavy)
[7] Auto O ff 30 The power turns o ff automatically after
30 minutes (default value).
Auto O ff does not occur while USB-
connected.
[8] LED Demo OFF Specifies the time until the LED DEMO
is shown.
1 (1 min) Default: 3 min
3 (3 min)
10 (10 min)
[9] Chain Mode Although the JU-06A is four-note polyphonic, you can
increase the polyphony by using a MIDI cable to
connect two or more JU-06A units and turning Chain
mode on.
OFF If Chain mode is on, the fifth voice and
subsequent notes are passed “thru” via
ON MIDI OUT.
Default: OFF
[10] Chorus Noise OFF Specifies the amount of noise when
(Noise O ff ) chorus is on.
OrG (ORIGINAL) reproduces the noise
HLF (Half) of the original JUNO’s chorus (default
value).
ORG
(Original)
[11] Control Change OFF Specifies the output destination of the
MIDI messages that are transmitted.
USB when you edit patch settings (operate
the panel).
MID Default: USB
ALL