Roland HP 702-LA, Руководство пользователя

Страница: 26 / 38

26
Making Various Settings (Function Mode)
Indication Value Explanation
Left Pedal
Changing the Effect of the Pedal (Left Pedal)
When you turn on the power, the left pedal functions as a soft pedal (p. 7). You can change the function of the pedal to a
variety of other operations. By assigning a function to the pedal, you can instantly change a setting by pressing the pedal while
you perform.
Soft
The pedal functions as a soft pedal.
Play/Stop The pedal has the same function as the [
s
] button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual Play.
* This is available only when using Dual Play.
Reg. Pedal
Shift
You can assign a pedal to successively switch registrations (p. 8). Each time you press the pedal, you will switch to the next
registration.
* Pedal function settings take priority in the following order: “Reg. Pedal Shift”
0
“Center/Left Pedal.”
Off Pressing the pedal does not change the registration.
Left Pedal
The soft pedal can be used only for switching registrations. In this case, the function assigned to the soft pedal
cannot be used.
Center Pedal
The sostenuto pedal can be used only for switching registrations. In this case, the function assigned to the
sostenuto pedal cannot be used.
MIDI-related settings
Local Control
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected via USB, set this parameter to Local Off.
Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or
get dropped. To prevent this, you can enable the “Local Off” setting so that the keyboard and internal sound generator will be
disconnected.
Off
Local Control is off.
The keyboard is disconnected from the internal sound generator. Playing the keyboard will not produce sound.
On
Local Control is on.
The keyboard is connected to the internal sound generator.
MIDI
Transmit Ch.
MIDI Transmit Channel Settings (MIDI Transmit Ch.)
This setting specifies the MIDI channel on which the unit will transmit.
This unit will receive all sixteen channels (1–16).
Off, 1–16
Overall operation settings
Language
Changing the Language Displayed in the Screen (Language)
You can change the language that is displayed in the screen.
English, Japanese
Display
Contrast
Adjusting the Brightness of the Display (Display Contrast)
You can adjust the brightness of the piano’s display.
1–10
Screen Saver
Specifying the Time Until the Operating Panel Is Dimmed (Screen Saver)
If no operations are performed for a specific length of time, the operating panel’s button LEDs and display are dimmed.
You can specify the time until they are dimmed.
Off, 30 sec., 1 min., 5 min., 10 min.
Volume Limit
Specifying a Maximum Volume (Volume Limit)
You can specify a maximum volume value. This lets you prevent loud sound from being produced unintentionally.
MEMO
You can also set the volume limit by holding down the [ ] knob and turning the [ ] knob.
20, 40, 60, 80,100