Roland Groovebox MC-707, Справочное руководство

Страница: 55 / 121

55
UTILITY
Initializing a New SD Card
(FORMAT)
1 .
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY MENU screen appears.
2 .
Use the cursor [<] [>] buttons to select “FORMAT,” and then
press the [ENTER] button .
A confirmation message appears.
3 .
Use the cursor [<] [>] buttons to select “OK,” and then press
the [ENTER] button .
The SD card is initialized.
If you decide to cancel, use the cursor [<] [>] buttons to select
“CANCEL,”
and then press the [ENTER] button.
Returning to the Factory Settings
(FACTORY RESET)
This returns the system settings to their factory-set state.
NOTE
If necessary, be sure to save the project before you execute FACTORY RESET.
1 .
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY MENU screen appears.
2 .
Use the cursor [<] [>] buttons to select “FACTORY RESET,”
and then press the [ENTER] button .
A confirmation message appears.
3 .
Use the cursor [<] [>] buttons to select "OK," and then press
the [ENTER] button .
The system settings return to their factory-set state.
If you decide to cancel, use the cursor [<] [>] buttons to select
“CANCEL,”
and then press the [ENTER] button.
4 .
As directed in the screen, turn the power off and then on
again .
Optimizing the Internal Memory
(LOOPER OPTIMIZE)
As samples are loaded into the looper and then deleted, the free space
in memory can become fragmented, so that the available space cannot
be used efficiently.
By using Looper Optimize, you can optimize the internal memory
usage and increase the storage that is available for recording.
1 .
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY MENU screen appears.
2 .
Use the cursor [<] [>] buttons to select “LOOPER OPTIMIZE,”
and then press the [ENTER] button .
A confirmation message appears.
Usage:
The amount of occupied storage space.
Fragment:
The proportion that is fragmented. Higher values mean
that memory usage is less efficient, so that you can expect an
improvement in recordable time by executing Looper Optimize.
* Optimization is also performed when a project is loaded.
3 .
Use the cursor [<] [>] buttons to select “OK,” and then press
the [ENTER] button .
Memory optimization is executed.
If you decide to cancel, use the cursor [<] [>] buttons to select
“CANCEL,” and then press the [ENTER] button.