24
Chapter 3 Editing The Sounds
* The result will differ for each patch.
* For some patches, there will be no effect.
3.
Press the [EXP TYPE] button or [EXIT] button to return
to Play mode.
* If you want to keep your edited sound, execute Write (p. 24) to
write your settings into a USER patch.
Storing the Sounds You
Create (WRITE)
The sounds you create will be lost if you change the patch or
simply turn off the power. If you want to keep the
modifications you’ve made, you must perform the Write
procedure.
1.
Press the [WRITE] button.
fig.3-06(WRITE)
The BANK indicators will indicate USER, and the
display will blink.
2.
Use the [NUMBER/VALUE] knob to select the patch
number into which you want to write your settings.
* If you decide to abort the Write operation at this point, press
the [EXIT] button.
3.
Press the [WRITE] button once again.
Your settings will be written into the patch you selected.
* Use caution, since the settings previously stored in that patch
will be overwritten and lost.
* The decimal point in the display will blink while the setting is
being stored. Don't turn off the power during this time.
b4: PITCH BEND 4
When the pedal is pressed, the pitch
changes down to a semi tone (max.).
b5: PITCH BEND 5
When the pedal is pressed, the pitch
changes down to a whole tone (max.).
b6: PITCH BEND 6
When the pedal is pressed, the pitch
changes down to one octave (max.).
EF: Effect
The pedal will adjust the effect used with-
in each patch.
GR-20_e.book 24 ページ ２００７年７月２日 月曜日 午後１２時５３分
