12
You can play back a recorded performance to check your playing, or
play along with a recorded performance.
Recording
Recording a New Song
* If you want to record with Twin Piano turned on, set SMF Play
Mode (p. 25) to “External.”
Getting ready to record
3
2
3
1.
Select the tone that you want to play (p. 8).
2.
You can sound the metronome if you like (p. 10).
You can specify the tempo and time signature of the metronome.
MEMO
The metronome tempo and time signature are stored in the song,
so that the song can play back with the same tempo and time
signature.
3.
Press the [
t
] button.
The [
t
] button lights, the [
s
] button blinks, and this piano enters
record-standby mode.
If you decide to cancel recording, press the [
t
] button once again.
MEMO
If you want to record the left hand and right hand separately,
press the part button of the part that you want to record (left-
hand or right-hand), making it blink.
* If you don’t select a part at this time, your performance is
recorded to the following buttons.
When playing a single tone
[Right] button
When playing different tones with
the left and right hands (Split Play)
[Right] button and [Left] button
When dividing the keyboard into
left and right regions that play the
same range of pitches (Twin Piano)
When playing two tones layered
(Dual Play)
[Right] button and [Accomp] button
Starting your recording and saving it
1 2
1.
Press the [
s
] button.
After a two-measure count is sounded (the measure number in the
lower right of the display indicates “-2” and then “-1”), recording
starts.
When the count begins, the [
t
] button and [
s
] button light.
MEMO
If you play the keyboard without pressing the [
s
] button,
recording starts immediately. In this case, a count is not sounded.
2.
Press the [
s
] button.
Recording stops, and your performance is automatically saved.
MEMO
5
You can delete the song that you recorded (p. 13).
5
You can rename the song that you recorded (p. 14).
NOTE
Never turn off the power while “Saving...” is shown in the display.
Listening to the recorded performance
After you record, the newly recorded song is selected.
1.
Press the [
s
] button.
Playback starts from the beginning of your recorded performance.
Overdubbing a Recorded Performance
You can record your right-hand (or left-hand) performance by
overdubbing it onto the previously recorded left-hand (or right-hand)
performance.
* When overdubbing different tones, set the SMF Play Mode (p. 25)
to “External.”
1.
Select the recorded data of the performance that you want
to overdub (p. 11).
MEMO
If you want to rerecord only a portion of the song, use the [
x
]
[
y
] buttons to move to the measure at which you want to start
recording.
2.
Press the [
t
] button.
The [
t
] button lights, the [
s
] button blinks, and the piano enters
record-standby mode.
In this case, New Song is selected.
If you decide to cancel recording, press the [
t
] button once again.
3.
Press the cursor [
J
] (right) button.
The recorded data of step 1 is selected.
MEMO
The tempo and time signature of the overdubbed performance
will be the same as the settings of the recorded data you selected.
4.
Press the part button of the part that you want to record
(left-hand or right-hand), making it blink.
Parts whose button is lit will play back during recording.
5.
Start recording as described in “Starting your recording
SMF recording
SMF recording
Left-hand part
Right-hand part
˙
Recording Your Performance
°
Advanced Operation
